Control measures for puffed leisure food equipment

Domestic extruders basically have no density control measures, only simple considerations in the configuration of the screw and extrusion chamber. Some manufacturers imitate Wenger's venting device, but due to certain factors in extruder technology and processing, the operability is poor.It is relatively easy to achieve pressurized cutting in puffing machinery. An air pump can be used to maintain the required pressure, and a rotary airlock can be used for the discharge of the corn puffing machine. Moreover, since the required pressure is not high, sealing the moving parts is not a major issue.This technology is easy to implement in production equipment, and the operation and use of extruded products control various aspects of the exhaust model better than density, representing a new direction for the development of puffing technology.Before adjusting the domestic exchange of technological puffing as a component, the current quality has also been studied in depth, with two types of products: single-screw and twin-screw.Density control is a challenging aspect in the production of extruded feed, especially in the Chinese aquatic feed industry, where sinking feed often fails to sink as expected.

The quality of food machinery affects the production quality and safety of the food industry, and the knives inside food machinery come into direct contact with food production and packaging, making the selection of knives for food machinery very important. When choosing machinery, it is necessary to test it to see the results of production and packaging; the results only reflect quality, while durability and wear resistance cannot be determined through testing—they require time to prove. The quality of food machinery affects the production quality and safety of the food industry, and the knives inside food machinery come into direct contact with food production and packaging, making the selection of knives for food machinery very important. When choosing machinery, it is necessary to test it to see the results of production and packaging; the results only reflect quality, while durability and wear resistance cannot be determined through testing—they require time to prove.