Precautions for using pet feed extrusion machinery

With the increasing number of people raising pets, pet feed extrusion machinery has also come into people's sight. Today, the editor has summarized the usage methods of pet feed extrusion equipment for your reference.

During long-term operation, the pet feed extrusion machinery should be fixed on a cement foundation. If the workplace is frequently changed, the pet feeding equipment and motor should be installed on an angle iron base. If the PET feeding equipment is driven by diesel, the power of the diesel engine should be matched. That is, the power of the diesel engine should be slightly greater than that of the PET feeding equipment, the grooves of the two pulleys should be the same, and the outer surfaces of the pulleys should be on the same plane.

Always pay attention to the operation of pet feed extrusion machinery. Deliveries must be unified to prevent clogging the vehicle and avoid prolonged overloading. If vibration, abnormal noise, excessive temperature of bearings or the body, or external spraying occurs, stop the machine immediately for inspection. Only after troubleshooting can work resume.

Before starting the pet feeding equipment, rotate the rotor by hand to check whether the claws, hammers, and rotor are flexible and reliable, whether there is any collision inside the housing, whether the rotor's rotation direction matches the arrow direction on the machine, and whether the motor and crusher are well lubricated.

The usage methods of pet feed extrusion machinery are generally as described above. For more information, please visit our official website and keep an eye on our site updates.