Extruded dog food machinery equipment

Pet food production line, pet feed production line, pet food processing equipment, pet food production machinery, pet food production equipment, pet feed processing machinery, pet food equipment, dog food equipment, dog food machine, dog food extruder, dog food processing equipment. Dog food machinery, extruded dog food equipment, dog food machine ① Jinan Datong Company has developed and researched various models of pet food production lines based on market demand. Depending on the output, this production line has multiple configurations.

② This extruded dog food machinery can adjust process parameters such as raw materials, temperature, and moisture to give the product novel shapes, unique taste, rich nutrition, and fine texture, suitable for the preferences of different pets.

③ This puffing dog food machinery is suitable for producing feed for foxes, minks, monkeys, birds, dogs, cats, and puffed corn, making it an ideal choice for various manufacturers.

④ The pet food production line is an economical and practical type of puffed dog food processing equipment with a production capacity of 120-1000 kg/h. This pet food production line can add 20-40% animal viscera, chicken frames, and other ground bone and meat paste directly into puffed dog food, solving the problem of processing fresh meat, fresh bones, and slaughterhouse by-products from dehydration to grinding. It is highly favored by customers!

⑥ This pet food production line solves the shortcomings of small single-screw dog food extruders, such as insufficient puffing degree, difficulty in cleaning the screw after each production, limited addition ratio of fresh meat and bone paste, rapid screw wear, and high cost of later accessories. It is highly favored by large dog farms and individual entrepreneurs.

⑦ For feed of different shapes and sizes, the mold can be replaced and the puffing degree can be adjusted.

Dog food shapes: heart, bone, round, triangle, small fish, square, etc. Cat food shapes: heart, bone, round, triangle, small fish, square, etc. I. Process flow of puffing dog food machinery and equipment:

Raw material crushing → Raw material preparation (corn flour, soybean meal, starch, fish meal, etc.) → Mixer → Conveyor → Twin-screw feed extruder → Conveying → Drying equipment (electric oven, gas/oil oven or steam oven) → Oil spraying → Twin-cylinder seasoning system → Cooling conveyor → Screening → Silo → Packaging machine. Extruded dog food machinery equipment II. Extruded dog food machinery equipment configuration:

Powder mixer → Feeder → Extruder → Conveyor → Multi-layer oven → Seasoning line → Cooling conveyor → Vibrating screen → Packaging machine III. Since some extruded feed production requires crushing, the following can be used:

Powder mixer → Feeder → Extruder → Crusher → Packaging machine

IV. Extruded dog food machinery equipment process composition:

1. Mixer: Add a certain proportion of water to raw materials such as corn flour, rice flour, bean flour, fish meal, meat meal, grain flour, and additives, and mix them thoroughly and evenly.

2. Feeder: Using a motor as power for spiral conveying, transport the mixed raw materials to the feeding hopper of the twin-screw extruder. This equipment makes feeding convenient and fast, saves labor, and is highly efficient.

3. Twin-screw feed extruder: Under high temperature and high pressure conditions with the extrusion of twin screws, the starch structure in the mixed raw materials changes, becoming easily absorbable nutrients. The material is extruded through a feed die, and by adjusting the rotation speed of the cutting motor, feed pellets of uniform size and length are produced. The specific pellet size and shape can be obtained by changing the die. The feed extruder adopts variable frequency speed control technology, which is energy-saving and provides precise speed control. The motor current and speed during operation can be directly viewed on the inverter panel, ensuring equipment safety.

4. Conveyor: Transports the produced feed pellets into the multi-layer drying equipment.

5. Multi-layer oven: The oven is divided into electric ovens, fuel oil ovens, gas ovens, and steam ovens, with temperatures ranging from 0 to 150 degrees Celsius, adjustable via the control cabinet. The interior of the oven features a stainless steel mesh belt, ensuring stable transportation and low failure rates. Feed pellets circulate through multi-layer S-shaped tracks, drying them to a safe moisture content and extending shelf life.

6. Spray seasoning line: The oil sprayer applies oils, attractants, etc. The seasoning drum comes in octagonal, cylindrical, single-drum lift, and double-drum seasoning line configurations, selected based on production volume and product characteristics. It sprays oil onto the feed surface while evenly distributing minced meat and spices. This process also removes burrs and rough edges from the feed pellet surface, making it smoother.

7. Cooling conveyor: reduces the surface temperature of dried feed pellets, promotes fat solidification, lowers pellet temperature, and facilitates packaging.

8. Vibrating screen: removes excess scattered material and pellet debris.

9. Packaging machine: manual sealing machines and automatic packaging machines are available; for details, please contact the manufacturer.

6. Equipment quality control:

1. Preliminary design control of equipment

Technical personnel carry out scientific and reasonable design based on the actual conditions and requirements of the customer's factory, power supply, location, etc., combined with equipment testing conditions.

2. Standard for selection of spare parts

As a supplier of spare parts, we strictly screen the products provided by suppliers and select manufacturers with high quality and low prices in the same industry. Under the premise of product quality, we reduce equipment manufacturing costs, allowing customers to purchase cost-effective equipment. For the same type of outsourced parts, we select three suppliers to ensure the best are chosen through competition.

3. Production control

After the sales department receives an order, it submits it to the technical department, which produces the corresponding CAD drawings for the equipment based on the order details. The production department arranges for relevant parts to be procured, produced, and processed according to the CAD drawing technical documents.

4. Equipment and Parts Acceptance

There are dedicated quality control personnel who conduct batch sampling inspections on purchased and outsourced parts. Quality inspections are carried out for key and precision spare parts.

Self-inspection, mutual inspection, and final inspection shall be conducted by personnel processing self-made parts, and they can only be put into use after all inspections pass.

After the finished equipment is installed, after-sales technical personnel will conduct acceptance inspection. The equipment must run idle for more than half an hour on site, and only after no faults are found can it be loaded for on-site debugging. Ensure that each piece of equipment meets factory conditions and issue an equipment certificate.

7. Company After-Sales Service Commitment

1. The company's after-sales service personnel can provide the ingredients and basic formulas of related products.

2. On-site training for the relevant personnel of the buyer on equipment operation and regular maintenance.

3. Regular after-sales phone follow-ups with customers to help resolve any difficult issues encountered during equipment use.

4. Our company provides high-quality and affordable spare parts to customers year-round, and offers support for equipment upgrades and new product development.

5. For equipment damage occurring after the warranty period, upon receiving notification from the customer, we will arrive at the maintenance site within two days for users within the province. For users outside the province, we will negotiate with technical personnel to arrive at the site as soon as possible. For out-of-warranty equipment, the company will charge service and spare parts replacement costs.

6. During the warranty period, if equipment damage is caused by non-human factors, the company provides free repair. For equipment damage caused by human factors or force majeure, the company provides repair services but charges relevant fees.

Welcome new and old customers to choose our pet feed processing equipment. The company can provide OEM processing, engineering solution design, preferential supply of accessories, and equipment upgrades! For more details, please call our sales staff.